HOMEプロダクト一覧MICRESSサンプル&事例紹介

サンプル&事例紹介MICRESS:マルチフェーズフィールド法に基づく合金組織形成計算ソフトウェア

MICRESS 関連文献一覧

2015年以降2014年2013年2012年2011年2010年2009年2008年以前


 2015年以降

2015年~2018年はこちら

 2014年

O. Güvenç, M. Bambach, and G. Hirt
Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working
steel research int. 85 (2014) No. 6 DOI: 10.1002/srin.201300191
M. Apel, J. Eiken and U. Hecht
Phase field models for heterogeneous nucleation: Application to inoculation in alpha-solidifying Ti-Al-B alloys
European Physical Journal Special Topics 223 3 (2014) 545
M. M. Franke, R. F. Singer and I. Steinbach
Tertiary dendritic instability in late stage solidification of Ni-based superalloys
Modelling Simul. Mater. Sci. Eng. 22 (2014) 025026
M. Apel, G. Laschet, B. Böttger and R. Berger:
Phase Field Modeling of Microstructure Formation, DSC Curves, and Thermal Expansion for Ag-Cu Brazing Fillers Under Reactive Air Brazing Conditions
Advanced Engineering Materials (2014) DOI: 10.1002/adem.201400101
R. Berger, M. Apel and B. Böttger:
Phase Field Modeling Applied to Reactive Air Brazing: Investigating Reaction Kinetics with Focus on Oxygen
Exchange
Advanced Engineering Materials (2014) DOI: 10.1002/adem.201400103
G. J. Schmitz:
"Von Massalski nach MICRESS® - Gefügesimulationen in technischen Werkstoffen"
in: J.Hildebrand, T.Loohse, J. Sakkiettibutra and M.Brand (eds):
"Simulationsforum 2013 Schweisstechnik und Wärmebehandlung"
ISBN 978-3-00-045902-3 (2014) pp. 1-11
S.Niknafs and R. Dippenaar
Experimentally-aided Simulation of Directional Solidification of Steel
ISIJ International, Vol. 54 (2014), No. 3, pp. 526–532
Na Ta, Lijun Zhang, and Yong Du
Design of the Precipitation Process for Ni-Al Alloys with Optimal Mechanical Properties: A Phase-Field Study
Metallurgical and Materials Transactions A 45 4 (2014)1787 DOI: 10.1007/s11661-014-2192-6

 2013年

Wei-hua SUN, Li-jun ZHANG, Ming WEI, Yong DU, Bai-yun HUANG
Effect of liquid diffusion coefficients on microstructure evolution during solidification of Al356.1 alloy
Trans. Nonferrous Met. Soc. China 23(2013) 3722−3728
A.Carré, B.Böttger, M.Apel
Implementation of an antitrapping current for a multicomponent multiphase-field ansatz
Journal of Crystal Growth 380(2013)5–13
A. Ramazani, P.T. Pinard, S. Richter, A. Schwedt , U. Prahl:
Characterisation of microstructure and modelling of flow behaviour of bainite-aided dual-phase steel
Computational Materials Science 68 (2013) available online june 19th 2013:
A. Ramazani, Y. Li, K. Mukherjee, U. Prahl, W. Bleck, A. Abdurakhmanov, M. Schleser, U. Reisgen
Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
Computational Materials Science 68 (2013) 107–116
B. Böttger, M. Apel, B. Santillana, and D.G. Eskin:
Relationship Between Solidification Microstructure and Hot Cracking Susceptibility for Continuous Casting of Low-Carbon and High-Strength Low-Alloyed Steels: A Phase-Field Study
Metallurgical and Materials Transactions A 44 5 (2013) 3765. DOI: 10.1007/s11661-013-1732-9
G.J. Schmitz, B. Zhou, B. Böttger, J. Villain and S. Klima
Phase-field modeling and experimental observations of microstructures in solidifying Sn-Ag-Cu solders
Journal of Electronic Materials 42 8 (2013)2658
B. Böttger, G. J. Schmitz, F-J. Wahlers, J. Klöwer, J. Tewes, B. Gehrmann
New Freckle Criterion for Technical Remelting Processes
High Temperatures-High Pressures 42 2 (2013) 115-136
G. Laschet, P.Fayek, T.Henke , H.Quade, U.Prahl
Derivation of anisotropic flow curves of ferrite–pearlite pipeline steel via a two-level homogenisation scheme
Materials Science & Engineering A 566 (2013) 143–156
A. Ramazani, Y. Li, K. Mukherjee, U. Prahl, W. Bleck, A. Abdurakhmanov, M. Schleser, U. Reisgen
Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
Computational Materials Science, Volume 68, February 2013, Pages 107–116

 2012年

I. Lopez-Galilea, S. Huth, S. G. Fries, N. Warnken, I. Steinbach, and W.Theisen:
Microsegregation and Secondary Phase Formation During Directional Solidification of the Single-Crystal Ni-Based Superalloy LEK94
METALLURGICAL AND MATERIALS TRANSACTIONS A 43A (2012)5153
M. Tolui, M. Militzer
Phase Field Modelling of Microstructure Evolution in the HAZ of X80 Linepipe Steel
Proceedings of the 2012 9th International Pipeline Conference IPC2012 September 24-28, 2012, Calgary, Alberta, Canada
IPC2012-90378
B. Böttger, G.J. Schmitz, and B. Santillana
Multi-Phase-field modeling of solidification in technical steel grades
Trans Indian Inst Met 65 (6) (2012) 613–615 DOI: 10.1007/s12666-012-0169-y
J. Rudnizki, U. Prahl and W. Bleck
Phase-field modelling of microstructure evolution during processing of cold-rolled dual phase steels
Integrating Materials and Manufacturing Innovation 2012, 1:3 doi:10.1186/2193-9772-1-3
I. Lopez-Galilea, S. Huth, S.G. Fries, N. Warnken, I. Steinbach and W. Theisen
Microsegregation and Secondary Phase Formation During Directional Solidification of the Single-Crystal Ni-Based Superalloy LEK94
METALLURGICAL AND MATERIALS TRANSACTIONS A (2012) DOI: 10.1007/s11661-012-1327-x
J. Lacaze, J. Eiken, A. Hazotte
Resampling technique applied to statistics of microsegregation characterization
Materials Science and Engineering 33 (2012) 012062
J.Eiken
Numerical solution of the phase-field equation with minimized discretization error
IOP Conference Series - Materials Science and Engineering 33 (2012) 012105
B Böttger, M Apel, B Santillana and D G Eskin
Phase-field modelling of microstructure formation during the solidification of continuously cast low carbon and HSLA steels
IOP Conference Series - Materials Science and Engineering 33 (2012) 012107
G.J.Schmitz and U.Prahl (eds):
Integrative Computational Materials Engineering- Concepts and applications of a modular simulation platform
Wiley VCH Verlag Weinheim, ISBN 978-3-527-33081-2 (2012)
Weihua Sun, Senlin Cui. Lijun Zhang,Yong Du, Baiyun Huang
Phase-field Simulation of Microstructural Evolution of gamma
Precipitate in gamma-prime Matrix in Binary Ni-Al Alloys
Procedia Engineering 36 ( 2012 ) 200 ‐ 206
Janin Eiken:
The Finite Phase-Field Method - A Numerical Diffuse Interface Approach for Microstructure Simulation with Minimized Discretization Error,
MRS Proceedings 2012 1369 : mrss11-1369-xx05-05 DOI: 10.1557/opl.2012.510
Y. Takahama, M.J. Santofimia, M.G. Mecozzi, L. Zhao, J. Sietsma
Phase field simulation of the carbon redistribution during the
quenching and partitioning process in a low-carbon steel
Acta Materialia (2012) in press
Yong Du, LiJun Zhang, SenLin Cui, DongDong Zhao, DanDan Liu,
WeiBin Zhang , WeiHua Sun and WanQi Jie
Atomic mobilities and diffusivities in Al alloys
Science China 55 2 (2012) 306–328 doi: 10.1007/s11431-011-4692-6
Xiao, NaMin, Chen Yun, Li DianZhong and Li YiYi
Progress in mesoscopic modeling of microstructure evolution in steels
Science China 55 2 (2012) 341–356 doi: 10.1007/s11431-011-4699-z
Galina Lasko, Markus Apel, Antoine Carré, Ulrich Weber and Siegfried Schmauder
Effect of Microstructure and Hydrogen Pores on the Mechanical Behavior of an Al7%Si0.3%Mg Alloy Studied bya Combined Phase-Field and Micromechanical Approach
Advanced Engineering Materials 13 (2012)1 DOI: 10.1002/adem.201100188
FUJIYAMA NAOTO , OSUKI TAKAHIRO , SEKI AKIRA , HIRATA HIROYUKI , OGAWA KAZUHIRO Grain growth behavior analysis of low alloy steel using phase-field method: Development of method to predict grain growth behavior at Heat Affected Zone(1) [in Japanese]
Prep.Nat.Meet.JWS 2012s(0), 118-119, 2012
FUJIYAMA NAOTO, NISHIBATA TOSHINOBU , SEKI AKIRA , HIRATA HIROYUKI , OSUKI TAKAHIRO , OGAWA KAZUHIRO
Suggestion of grain boundary mobility incorporating pinning effect by MICRESS:The prediction of grain growth behavior at Heat Affected Zone (2) [in Japanese]
Prep.Nat.Meet.JWS 2012f(0), 156-157, 2012

 2011年

Jenny Rudnizki:"Through-process model for the microstructure of dual-phase steel",
PHD thesis IEHK RWTH Aachen University (2011)
Alexandre Viardin, Laszlo Sturz, Gerhard Zimmermann and Markus Apel
Phase-field modeling of the columnar-to-equiaxed transition in neopentylglycol-camphor alloy solidification
Journal of Physics: Conference Series 327 (2011) 012004
Matthias Militzer and Hamid Azizi-Alizamini
Phase Field Modelling of Austenite Formation in Low Carbon Steels
Solid State Phenomena Vols. 172-174 (2011) pp 1050-1059
Ingo Steinbach, Mathis Plapp: Pearlite revisited
Continuum Mech.Thermodyn. DOI 10.1007/s00161-011-0204-y
W.W. Song, U. Prahl, W. Bleck, K. Mukherjee:
Phase-Field Simulations of bainitic phase transformation in100CR6
TMS 2011 140th Annual Meeting and Exhibition: Materials Fabrication, Properties, Characterization, and Modeling
(Wiley 2011) ISBN 978-1-11802-946-6 pages 417-425
Lijun Zhang, Ingo Steinbach and Yong Du
Phase-Field Simulations of Diffusion Couples in the Ni-Al system
Int. J. Mat. Res 102 4 (2011)371
J. Rudnizki, B. Böttger, U. Prahl, and W. Bleck
Phase-Field Modeling of Austenite Formation from a Ferrite plus Pearlite Microstructure during Annealing of Cold-Rolled Dual-Phase Steel
METALLURGICAL AND MATERIALS TRANSACTIONS A 42A (2011) 2516
G.J. Schmitz, S. Benke, G. Laschet, M. Apel, U. Prahl, P. Fayek, S. Konovalov, J. Rudnizki, H. Quade,
S. Freyberger, T. Henke, M. Bambach, E.A. Rossiter, U. Jansen, U. Eppelt
Towards Integrative Computational Materials Engineering of Steel Components
Production Engineering & Research (2011) DOI: 10.1007/s11740-011-0322-1
B.Nestler, A. Choudhury
Phase-field modeling of multi-component systems
Current Opinion in Solid State and Materials Science Volume 15, Issue 3, June 2011, Pages 93–105
R. Altenfeld, M. Apel, D. an Mey, B. Böttger, S. Benke, C. Bischof
Parallelizing Computational Microstructure Simulations for Metallic Materials with OpenMP
accepted for publication in: Springer Lecture Notes in Computer Science (LNCS) series.
G. J. Schmitz, B. Böttger, J. Eiken, M. Apel , A. Viardin, A. Carré and G. Laschet.
Phase-field based simulation of microstructure evolution in technical alloy grades
Int J Adv Eng Sci Appl Math 2 4 (2012) 126 DOI 10.1007/s12572-011-0026-y (Springer 2012)
M.G. Mecozzi, J. Eiken, M. Apel, J. Sietsma
Quantitative comparison of the phase-transformation kinetics
in a sharp-interface and a phase-field model
Computational Materials Science 50(2011)1846

 2010年

M. Militzer
Phase field modeling of microstructure evolution in steels
Curr. Opin. Solid State Mater. Sci. (2010) doi: 10.1016/j.cossms.2010.10.001
Yuko Nomura, Satoshi Minamoto and Sukeharu Nomoto
Simulations of Solidification in Sn-3Ag-0.5Cu Alloys by the Multi-phase-field Method
ISIJ International, Vol. 50 (2010), No. 12, pp. 1920-1924
S. Minamoto, S. Nomoto, A. Hamaya, T. Horiuchi and S. Miura
Microstructure Simulation for Solidification of Magnesium-Zinc-Yttrium Alloy by Multi-phase-field Method
Coupled with CALPHAD Database
ISIJ International, Vol. 50 (2010), No. 12, pp. 1914-1919
J.Eiken
Phase-Field Simulations of Dendritic Orientation Selection in Mg-Alloys with Hexagonal Anisotropy
Materials Science Forum 649 (2010) pp 199-204
K. Mukherjee, U. Prahl, W. Bleck, U. Reisgen, M. Schleser, A. Abdurakhmanov
Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels
Mat.-wiss. u. Werkstofftech. 47 11 (2010)972
D. Senk, S. Stratemeier, B. Böttger, K. Göhler and I. Steinbach
Modeling of Hot Ductility During Solidification of Steel Grades in Continuous Casting - Part I
Advanced Engineering Materials 12 4(2010) 94

B.Böttger, S. Stratemeier, E. Subasic, K. Göhler, I. Steinbach and D. Senk
Modeling of Hot Ductility During Solidification of Steel Grades in Continuous Casting - Part II
Advanced Engineering Materials 12 4(2010) 101
A. Carré, B. Böttger, M. Apel
Phase-field modelling of gas porosity formation during the solidification of aluminium
International Journal of Materials Research 2010/04, Page 510-514
G. Laschet und M. Apel:
Thermo-elastic homogenization of 3-D steel microstructure simulated by the phase field method
Steel Res. Int., vol. 81, n°8 (2010) 637-643
Hamid Azizi-Alizamini, Matthias Militzer
Phase field modelling of austenite formation from ultrafine ferrite-carbide aggregates in Fe-C
International Journal of Materials Research 2010/04, Page 534-541
Morteza Toloui, Matthias Militzer
Phase field simulation of austenite grain growth in the HAZ of microalloyed linepipe steel
International Journal of Materials Research 2010/04, Page 542-548
Philippe Schaffnit, Charles Stallybrass, Joachim Konrad, Axel Kulgemeyer, Heike Meuser
Dual-scale phase-field simulation of grain growth upon reheating of a microalloyed line pipe steel
International Journal of Materials Research 2010/04, Page 549-554
J.Eiken
Phase-field simulation of microstructure formation in technical magnesium alloys
International Journal of Materials Research 2010/04, Page 503-509
M.Bünck, N.Warnken, A.Bührig-Polaczek
Microstructure evolution of rheo-cast A356 aluminium alloy in consideration of different cooling conditions by means of the cooling channel process
Journal of Materials Processing Technology 210 4 (2010) 624
S Fukumoto, Y. Oikawa, S.Tsuge and S. Nomoto
Prediction of Sigma Phase Formation in Fe-Cr-Ni-Mo-N Alloys
ISIJ International, Vol. 50 (2010), No. 3, pp. 445-449

 2009年

B. Böttger, A. Carré, G.J. Schmitz, J. Eiken and M. Apel
Simulation of the Microstructure Formation in Technical Aluminum Alloys using the Multi-Phase-Field Method
Transactions of the Indian Institute of Metals 62 4-5 (2009) 299.
P.K. Galenko, S. Reutzel, D.M. Herlach, S.G. Fries, I. Steinbach , M. Apel
Dendritic solidification in undercooled Ni–Zr–Al melts: Experiments and modeling
Acta Materialia 57 (2009) 6166–6175
N. Warnken, D. Ma, A. Drevermann, R.C. Reed, S.G. Fries and I. Steinbach
Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys
Acta Materialia (2009) 5862
B. Böttger, M. Apel, J. Eiken, P. Schaffnit , G.J. Schmitz and I. Steinbach:
Phase-Field Simulation of equiaxed solidification: A homoenthalpic approach to the micro-macro problem
Modelling of Casting, Welding and Advanced Solidification Processes MCWASP - XII, Vancouver 2009 Pages: 119-127
J. Eiken, M. Apel, V. T. Witusiewicz, J. Zollinger and U. Hecht
Interplay between α(Ti) nucleation and growth during peritectic solidification investigated by phase-field simulations
J. Phys.: Condens. Matter 21 (2009) 464104 doi:10.1088/0953-8984/21/46/464104
J.Eiken
Dendritic growth texture evolution in Mg-based alloys investigated by phase-field simulation
International Journal of Cast Metals Research 22, 1-4 (2009) 86-89(4)
P. Schaffnit, C. Stallybrass, S. Bez, A. Schneider, J. Konrad, A. Liessem
Quantitative phase–field simulation of the austenite grain growth
between 900°C and 1400°C of a micro-alloyed line-pipe steel
9th International Seminar Numerical Analysis of Weldability Graz-Seggau 2009 (pre-print)
I. Steinbach
Pattern formation in constrained dendritic growth with solutal buoyancy
Acta Materialia 57 (2009) 2640–2645
G.Zimmermann, L.Sturz, M.Walterfang, J.Dagner
Effect of melt flow on dendritic growth in AlSi7-based alloys during directional solidification
International Journal of Cast Metals Research 22, 1-4 (2009) 335-338(4)
S. Fukumoto and S. Nomoto
Microstructure Simulation for Solidification of Stainless Steel by Multi-Phase-Field Model
J. Japan Inst. Metals, Vol. 73, No. 7 (2009), pp. 502-508 (in Japanese)
S. Nomoto, S. Minamoto and K. Nakajima
Numerical Simulation for Grain Refinement of Aluminum Alloy by Multi-phase-field Model Coupled with CALPHAD
ISIJ International 49 7 (2009) 1019
M. Apel, B. Böttger, J. Rudnizki, P. Schaffnit and I. Steinbach
Grain Growth Simulations including particle pinning using the Multi-Phasefield Concept
ISIJ International 49 7 (2009) 1024
B. Böttger, J. Eiken, M.Apel,
Phase-field simulation of microstructure formation in technical castings – A self-consistent homoenthalpic approach to the micro–macro problem
J. Comput. Phys. 228 (2009), 6784-6795
I. Steinbach
Phase-field models in Materials Science –Topical Review
Modelling Simul. Mater. Sci. Eng. 17 (2009)073001
S.G.Fries, B.Böttger, J.Eiken, I.Steinbach
Upgrading CALPHAD to microstructure simulation: the phase-field method
Int.J.Mat.Res 100(2009)2
M.Apel, S.Benke,I.Steinbach
Virtual Dilatometer Curves and effective Young's modulus of a 3D multiphase structure calulated by the phase-field method
Computational Materials Science 45 (2009) 589
S.S.Khan, N.Hort, J.Eiken, I.Steinbach and S.Schmauder
Numerical Determination of Heat Distribution and Castability Simulations of as Cast Mg-Al Alloys
Advanced Engineering Materials 11 3 (2009) 162

 2008年以前

2008年度以前の論文・書籍はこちら